Wear Strips > Belt Track Wear Strip Belt Track Wear Strip I.J. WHITE Wear Strips are exclusive, custom extruded profiles which meet the demanding requirements of low-tension spiral systems and increase belt life. The UHMW (Ultra High Molecular Weight), high density polyethylene wear strip is the most non-abrasive, wear resistant, non-metallic material available in the industry. Having an extremely low coefficient of friction enables the spiral belt to glide smoothly and quietly over the track system. Easily installed and available for all temperature applications, the I.J. WHITE custom profile is an integral part in each of our quality-built systems. Track Wear Strips: Blast Freezers and Coolers Description Part Number 1/8" Low Friction 26-1018-01 3/16" Low Friction 26-1036-01 3/16" Ultra Series Low Friction Wear Strip 26-1036-01 1/4" Low Friction 26-1014-01 3/8" Low Friction 26-1038-01 1/4" Ultra Series Low Friction Wear Strip 26-1014-02       Proofing System Wear Strips: Proofing Systems Specially engineered wear strips for the proofing environment must have the proper friction co-efficient and be able to withstand the heat and humidity without excessive elongation. Description Part Number 1/8" Wear Strip 29-6018-04 1/4" Wear Strip 29-6014-04 3/16" Wear Strip 29-6036-04 3/8" Wear Strip 29-6038-04       High Temperature Wear Strip This High Temperature Wear Strip has been developed to give the same low friction results as our other Wear Strip, and is excellent for dryers, and oven applications. NOTE: Please call I.J. WHITE for custom cut lengths. Description Part Number 1/8" Track Wear Strip to +250°F (+121°C) - Nylon 29-4018-04 1/8" Track Wear Strip to +400°F (+204°C) 29-5018-04 1/4" Track Wear Strip to +400°F (+204°C) 29-5014-04 1"x1" Upright Wear Strip to +400°F (+204°C) 29-5101-04 2" Upright T-Wear Strip to +400°F (+ 204°C) 29-5002-04